Endotherm – energy saving additive

£34.99

EndoTherm when added to the bulk water in your heating system will help you save 15% on your annual heating bill.

98 in stock

SKU: END-03 Category: Tags: ,

Description

An independently proven energy saving additive that will save up to an average 15% of energy bills. Simple to add and non corrosive. 500mL will treat up to 12 radiators. Simply pour into the header tank of your heating system.

EndoTherm when added to the bulk water in your heating system will greatly reduce the surface tension of the water. This changes the way bubbles form when the water is heated. No longer will the bubbles be large, lazy and obstructive as they flow through the system; instead they will be small, speedy and offer no obstruction accelerating the heat transfer from the boiler tube into the circulating liquid. The boiler does not need to work as hard to achieve and maintain the required temperature.

  • EndoTherm™ is a unique product on the market delivering unbeatable savings.
  • EndoTherm™ is an energy saving additive for central heating systems.
  • The effects of EndoTherm™ has been independently tested and proven to deliver up to 15% savings on heating costs.
  • EndoTherm™ has been proven to be non-corrosive and cause no damage to heating system components.
  • Easy to install in 10-15 minutes.
  • EndoTherm™ will work in any closed, wet central heating system.
  • EndoTherm™ is engineered and manufactured in the UK.

Testimonials

“The trial of EndoTherm™ at our head office has demonstrated a saving of  compared with the same period last
year. Consideration is now being given to implementing this technology into a larger site such as the Town Hall.”
– Cabinet Member: Public Health and Housing

“EndoTherm™ was installed into a low secure inpatient service in South Wales. Within days the temperature in the home had noticeably increased. Our maintenance department had to lower the seing on the boiler to compensate. At the end of the month our gas consumption was . lower than the same month last year adjusted with degree days. Obviously we are very pleased with this result.”
– Director, South Wales healthcare group

“The trials with EndoTherm™ in our boilers have been very impressive. We have noted less circulating noise and beer conductivity. We will install EndoTherm™ into any central heating systems we install in the future.”
– Heating Engineer

“My average gas bill has gone down from  to  per month since EndoTherm™ was installed. Its amazing how
something so simple has made such a difference to my monthly heating bills.”
– Domestic installation, Cheshire

FAQs

HOW MUCH ENDOTHERM DO I NEED?

Domestically ml per  litres of heating system volume. Simply put, a home with up to  single radiators requires ml.
Commercially  litre per  litres of system volume. Experts from Endo Enterprises can calculate and advise exactly how much
EndoTherm™ will be required should your installation be any more complicated.

DOES ENDOTHERM WORK IN ANY HEATING SYSTEM?

Yes, any heating system where a boiler is used to heat water EndoTherm™ will work.

HOW LONG DOES ENDOTHERM LAST?

EndoTherm™ will remain in a closed central heating system without any deterioration of energy savings for at least  years,
according to independent tests.

HOW DO I INSTALL ENDOTHERM?

EndoTherm™ can be added to a system using a feed and expansion tank or via a partially drained radiator, a simple process
when carried out with our installation kit. See below for a step by step installation pictorial guide.

DOES ENDOTHERM DAMAGE MY HEATING EQUIPMENT?

Extensive testing has been carried out and EndoTherm™ has been proven to have no corrosive or damaging effects on the
materials found within heating systems.

IS ENDOTHERMTM DANGEROUS?

EndoTherm™ is not dangerous to the touch. It has been classified as a mild irritant but carries no hazardous threat.

SHOULD ENDOTHERM BE APPLIED TO A CLEAN OR EXISTING FILLED SYSTEM?

EndoTherm™ will work in any existing system whether “clean” or “dirty”. It is recommended that systems are flushed
before the installation of EndoTherm™ to maximise energy savings.

CAN ENDOTHERM WORK IN CONJUNCTION WITH AN INHIBITOR?

EndoTherm™ complements inhibitor products. This applies to systems already dosed with an inhibitor and systems where
an inhibitor is introduced aer EndoTherm™ has been installed. EndoTherm™ has some inhibitor properties itself and functions
alongside inhibitors without issue.

Additional information

Weight 0.5 kg